The two directions

Adding VAT is a single multiplication from the net price. Removing VAT is a single division from the gross price. Both use the same factor, 1 plus the rate as a decimal, so the two calculations are exact opposites.

Gross = Net × (1 + rate ÷ 100)

Net = Gross ÷ (1 + rate ÷ 100)

At the 20% standard rate the factor is 1.20. At the 5% reduced rate it is 1.05. At a historical rate, such as the 17.5% that applied from 1991 to 2011 apart from the 2008–09 cut, it is 1.175.

Why the VAT fraction exists

When you only need the VAT inside a gross amount, the VAT fraction does it in one step: rate ÷ (100 + rate). At 20% this is 20 ÷ 120 = 1/6, and at 5% it is 5 ÷ 105 = 1/21.

The fraction is the reason subtracting 20% from a gross price gives the wrong answer. 20% of the gross is a fifth, but VAT is only a sixth of the gross at the standard rate. On £120, the VAT is £20 and the net is £100, not the £96 you get by subtracting 20%.

The VAT fraction calculator applies the fraction to any gross amount and rate.

Rounding and line-level accuracy

HMRC expects normal rounding to the nearest penny, not truncation, but the rule differs by trader. Retailers must not round the VAT figure down, though they may round each calculation up or down. Businesses issuing VAT invoices to other businesses may use the Notice 700 paragraph 17.5 concession to round the total VAT down to a whole penny.

Calculate the VAT on the net amount, round it, then add it to the net so the two always reconcile. On a gross of £10.00 at 20%, the VAT is £1.67 and the net is £8.33.

On a mixed invoice you can calculate VAT per line or on the total for each rate. Both are used in practice, but stay consistent and keep a record of the method so a checker can follow it. The rounding guide works through a five-line comparison.

When the simple formula is not enough

Three situations need a different method. Under the margin scheme, VAT is charged on the dealer's margin rather than the full selling price. Under the domestic reverse charge, the customer accounts for the VAT instead of the supplier. And when reclaiming VAT on an expense, the input tax is the VAT already included in a gross amount.

Which method to use
SituationMethodTool
Add VAT to a net saleNet × (1 + rate)VAT calculator
Extract VAT from a gross amountGross × VAT fractionVAT fraction calculator
Second-hand goodsMargin × VAT fractionMargin scheme calculator
Construction reverse chargeNet × rateReverse charge calculator
Reclaiming VAT on a costGross × fraction × business useVAT on expenses calculator

Which rate applies

The arithmetic is only as good as the rate you feed it. Most supplies are standard rated at 20%, a defined list is reduced rated at 5%, and some supplies are zero rated at 0%. The rate is a legal question, not an arithmetic one, so check the VAT rates guide or the GOV.UK guidance before you rely on the number.

Key facts

How VAT is calculated in the UK at a glance
AttributeValueNote
Standard rate20%multiply net by 1.20; fraction 1/6
Reduced rate5%multiply net by 1.05; fraction 1/21
Zero rate0%multiply net by 1.00
VAT elementgross − netor net × rate ÷ 100
Roundingnearest pennythen add to the net